Welcome to the official website of Shanghai Angqin Measurement & Control Technology Co., Ltd.!

logo

logo

搜索
PRODUCT CENTER
Homepage
-
Porduct center
-
Special vehicle test equipment
-
ATV vehicle chassis dynamometer
-
ATV vehicle chassis dynamometer

PRODUCT CENTER

Product category
Number of views:
1000

ATV vehicle chassis dynamometer

Category:
ATV vehicle chassis dynamometer
The ATV vehicle chassis dynamometer is a consistency test for the production of four-wheeled all-terrain vehicles, and is an important basis for the scientific evaluation of the performance of four-wheeled all-terrain vehicles. The device performs integrated tests on the vehicle's maximum speed, acceleration, braking, and gear shifting parameters. Compared with the traditional method of using a special ground track for item-by-item test, it uses a chassis dynamometer to test the working conditions and has a small footprint. , The remarkable feature of high degree of automation can effectively improve the detection efficiency of the related performance of the four-wheel all-terrain vehicle.
Product serial number
ATV车辆底盘测功机
Category
Online message
Service Hotline:13391213221
1
Product description
Parameters
Experimental project
Technical parameter
We could not find any corresponding parameters, please add them to the properties table

1) Maximum speed performance test
2) Start acceleration performance test
3) Beyond accelerated performance testing
4) Speedometer test
5) Front wheel brake test (braking force) (test the front axle)
6) Rear wheel brake test (braking force) (test the rear axle)
7) Parking brake test (braking force)
8) Shift test

1. Diameter of rotating hub: 300mm
2. Width and clearance of the hub: 400mm-700mm-400mm (700mm inside the hub and 1500mm outside)
3. Applicable wheelbase of test bench: 700-1500mm
4. Applicable wheelbase of test bench: 900-1800mm
5. Load motor power in the speed test part: 22kw
6. Motor rated speed: 970r/min
7. The maximum speed of the test bench: 100Km/h
8. Maximum driving force of the test bench: 2208 N
9. Emergency braking device: The start brake disc structure is adopted, and the design strength can achieve the time required for the equipment to drop to 0km/h at any speed point in less than 4S.
10. Lifting device and blocking device of the test bench: Double-cylinder structure is adopted, and the lifting force is not less than 1.5T. The lifting structure of the vehicle and the blocking structure of the vehicle are linked to prevent the vehicle from running away during the test.
11.Maximum load-bearing capacity of the platform: 1500kg

Previous
None
Next
None

Related Products

72 inch heavy chassis dynamometer (2x2)
72 inch heavy chassis dynamometer (2x2)
72 inch heavy chassis dynamometer (2x2)
The heavy-duty chassis dynamometer is a chassis dynamometer that can perform commercial vehicle dynamic performance testing, economic performance testing, and emission testing. The electric inertia simulates the road resistance, and can reproduce the road resistance of the vehicle under test or customize the road resistance. The system is a completely independently designed and developed brand-new automobile test system with independent intellectual property rights in accordance with the technical requirements of national standards and European and American certification regulations. . The system can be docked with various emission analyzers to realize the national emission standards of automobile pollutants and foreign test cycle conditions. It can also be upgraded according to user requirements to meet the test requirements of other national emission standards. ●72-inch (1828.8mm) rotating hub, AC motor, suitable for heavy commercial vehicles ●The principle of central motor, side motor or multiple motors ●High-precision, high-repeatability quality simulation ●The accuracy is higher than EPA requirements ●Extremely compact design ●High dynamic stability ●Configure common emission test system interface ●Automation software module ●Convenient system upgrade
Detail 白箭头 黑箭头
72 inch heavy chassis dynamometer (1X2)
72 inch heavy chassis dynamometer (1X2)
72 inch heavy chassis dynamometer (1X2)
The heavy-duty chassis dynamometer is a chassis dynamometer that can perform commercial vehicle dynamic performance testing, economic performance testing, and emission testing. The electric inertia simulates the road resistance, and can reproduce the road resistance of the vehicle under test or customize the road resistance. The system is a completely independently designed and developed brand-new automobile test system with independent intellectual property rights in accordance with the technical requirements of national standards and European and American certification regulations. . The system can be docked with various emission analyzers to realize the national emission standards of automobile pollutants and foreign test cycle conditions. It can also be upgraded according to user requirements to meet the test requirements of other national emission standards. ●72-inch (1828.8mm) rotating hub, AC motor, suitable for heavy commercial vehicles ●The principle of central motor, side motor or multiple motors ●High-precision, high-repeatability quality simulation ●The accuracy is higher than EPA requirements ●Extremely compact design ●High dynamic stability ●Configure common emission test system interface ●Automation software module ●Convenient system upgrade
Detail 白箭头 黑箭头
1*2 simple chassis dynamometer (48-inch applicable vehicle speed 40~70km/h)
1*2 simple chassis dynamometer (48-inch applicable vehicle speed 40~70km/h)
1*2 simple chassis dynamometer (48-inch applicable vehicle speed 40~70km/h)
The 48-inch simple chassis dynamometer is a chassis dynamometer suitable for performance testing of passenger cars and light vehicles at speeds below 100km/h. It has high-precision and repeatable quality simulations. The use of a three-phase asynchronous motor positioned between the rolls ensures space saving, low performance loss and high torsional rigidity. It is used in front-wheel, rear-wheel and all-wheel-drive vehicles in single-axle and dual-axle configurations to ensure high dynamic stability of the front and rear axles. The modified system can simulate the road resistance with full electric inertia, reproduce the road resistance of the vehicle under test or customize the road resistance, and meet the dynamic, economic, regulatory and durability tests of the whole vehicle.
Detail 白箭头 黑箭头
Vehicle vibration durability test bench
Vehicle vibration durability test bench
Vehicle vibration durability test bench
AC-MCD601-****N series of durable chassis dynamometer systems for locomotives are designed to perform durability and reliability tests on two-wheeled locomotives. The test items mainly include endurance tests such as constant speed endurance test, operating condition endurance test, maximum speed test, driving condition test, and bumpy road endurance test. This system can be connected to our company's autopilot.
Detail 白箭头 黑箭头
logo

Address: No. 79, Tinghua Road, Tinglin Industrial Zone, Jinshan District, Shanghai, China

Phone: +86-15221756345/+86-18602502533

Fax: 021-61183239

E-mail：oceanhard@aq-group.cn

Home
About
Company Profile Company culture Development path Honor
Product
Commercial vehicle test equipment Light vehicle test equipment Motorcycle test equipment Special vehicle test equipment
Service
Pre-saling support After-sales service Service outlets
Download
National regulations Product Manual testing software System driver
News
Industry Information Social responsibility
Contact
Copyright © 2021 Shanghai Angqin Measurement & Control Technology Co., Ltd.
沪ICP备12035010号

相关文件下载

There is currently no content to display
Please add data record on website background.